Sacrificial Anodes for Bore Heads, Pumps, Casings and Riser Pipes.

Insist on the finest and most efficient protection available for your bore.

Anode-Tech produce a range of BoreGuard anodes specifically designed to protect bores, bore heads, pumps, casings and riser pipes from the costly ravages of rust.

For the first time ever, a truly effective preventative barrier against destructive corrosion is made possible by the development of new super efficient anodes.

The use of these new, highly efficient, dedicated anodes can potentially save millions by doubling or even tripling the working lives of bores.

Two kits are available: a “Ground Bed (Bagged) Anode” kit to be buried adjacent to the bore head and a “Lower Casing Kit” for attachment to the riser pipes.

As the BoreGuards save your pipes by consuming the rust, regular inspections and replacing of parts of for ongoing protection is required. The timing and replacement will vary according to specific conditions.

BoreGuard Kits Available:

Part No. BAG265M2

Ground Bed (Bagged) Anode Kit

Protects the bore head and upper body of the riser tube and metal bore casing.

The standard kit contains 1only 65mm x 265mm anode packaged in a calico bag backfilled with a Bentonite/Gypsum mix, with a connection through a 3 metre PVC copper cable securely attached to the anode core and the joint encased in a polyethylene heat shrink sleeve.

Part No. AUG1500M2

Lower Casing Kit

Protects the main body of the riser tube as well as any metal bore casing.

Each Kit comprises of two only 21mm x 1500mm extruded magnesium sacrificial anodes complete with attached end mounting brackets and stainless steel mounting clamps to enable them to be attached to the riser pipe.

BoreGuard magnesium and aluminium anodes are made from “Galvomag” – the established world standard for quality in the cathodic protection industry.

BoreGuard custom made kits can be tailored to suit your bore. Anode kits are designed to install easily on most casings, pumps & riser pipes with detailed installation instructions supplied with every kit.


BoreGuard anodes conform to Australian Standard AS2239. This standard advises that the by-products of magnesium anodes commonly used in “portable water applications” are non-toxic.